![]() OW-G01-**-CR-D2-3104B |
|
Machine tools and test machines
Example of application
Because there is no drain flow, energy can be saved by stopping hydraulic equipment power when clamping.
Example of application (clamp circuit)
Item | Specifications | ||
---|---|---|---|
Type C | Type 1 | Type 3 | |
Maximum working pressure | 10Mpa | 25MPa | |
Maximum flow | 50L/min | ||
Pressure adjustment range | 0.1 to 3.5MPa | 1.0 to 10.0MPa | 2.5 to 25.0MPa |
Operating temperature | -10 to 75°C | ||
Ambient temperature | 0 to 50°C | ||
Protection structure | JIS C0920 IP54 | ||
Supply voltage | DC12 to 24V +/- 10% | ||
Output element | Transistor open corrector output (photo coupler insulation) |
||
Load current | Maximum: DC35 V 100 mA | ||
Residual voltage | 1.2 V or less | ||
Hysteresis adjustment range | Approximately 1 to 10 % of set value | ||
Response speed | 20 msec or less |
Example of wiring
Note : When connecting a compact relay, make sure to connect counter voltage absorption element (diode) parallel to load.