|Maximum working pressure
Various control options enable circuit simplification and energy saving.
|N||Discharge amount automatically decreases to maintain the set pressure when discharge pressure reaches the value specified in the compensator. Remote control is also available using the attached pilot port.|
|NQ||Discharge pressure can change by two levels through the sequence valve embedded in the pump; therefore, one unit can perform conventional high/low pressure control and circuit energy can be saved.|
|RS||Solenoid valve for unloading is mounted on the pressure compensation type model, with the aim of minimizing energy loss when hydraulic pressure is not necessary.|
|WS||Two types of pressure compensation are obtained by turning on/off the solenoid valve embedded in the pump. The two kinds of output can be controlled while maintaining a constant actuator speed.|
|RQS||Unload function is added to the 2-pressure, 2-flow control type, to enable unloading with the solenoid valve embedded in the pump when hydraulic pressure is not necessary.|
|2-cutoff control type||CS||Two kinds of pressure and flow characteristics can be obtained with the solenoid valve embedded in the pump and the discharge control mechanism.|